1,There is thin type and thick type if divide it from the thickness (8mm and 12mm); the environment-protection capacity of thin type is stronger than that of thick type for the reason that thin type’s glue in unit area is less; and the density of thick type is not higher than that of thin type, its impact resistance is a little worse but is foot feeling is a little better.

2, There is standard type, wide plate and narrow plate if divide it from specification. Width of standard type usually is 191-195 and its length is about 1200-1300mm; length of wide plate is mostly are over 1200mm and its width is about 295mm; as for the narrow plate, its length is about 900-1000mm and its width is about 100mm.

3, There is aluminum oxide, melamine and piano coatings if divide it from surface coat. Standard laminate solid flooring must be Al2O3 abrasion-resistant paper. The country stipulates that the surface abrasion-resistance revolution of indoor laminate solid flooring must be over 6000 turns. Only need to 45g abrasion-resistance paper flooring or above can accord with the standard.

　　Melamine coating is usually used in the place where doest not require for higher abrasion resistance, such as wallboard, table board and so on. This flooring is called fake flooring in this industry. Its abrasion-resistance revolution is only 300-500turns.If the using strength is very large, the surface decorative paper will be worn in two or three months. As there is no abrasion-resistance coat on this decorative paper, it looks much beautiful and clear and feels much smooth, which is easy to make laypeople fucked. Piano coating is to use the paint used in solid wood flooring on laminate flooring. Actually it only uses lighter paint. Its abrasion resistance is far not compared with that of Al2O3 coating. Presently, solid wood flooring is developed to the direction of high abrasion resistance